480W AC DC Din Rail Power Supply Industrial Control Power Supply
Descriptions
LIF480-10BxR2isMornsunAC-DCconverterseriesfeaturingacost-efective, energyeficientgrenpowersuplysolutionforstandard DIN-rail mounting.Theproductsoferahighlevelofstabilityandimmunitytonoiseforindustrialcontrolequipment, machinery, andotherindustrial equipmentinavarietyofharshenvironments.TheselightweightAC-DCconvertershaveanextremelycompactdesignandthestandardrail instalation for space saving. With god EMCperformance, compliantwith international IEC/EN/UL/BS EN 62368, UL61010, IS13252(Part1), EN6158standardsforEMCandsafety.
Features
Specifications
| Selection Guide | ||||||
| Certification | Part No.* | Output Power (W)* |
Nominal Output Voltage and Current (Vo/Io) |
Output Voltage Adjustable Range(V) | Efficiency at 230VAC (%) Typ. |
Max. Capacitive Load (µF) |
| UL/EN/BS | LIF480- 10B24R2 | 480 | 24V/20A | 24-28 | 94.5 | 20000 |
| LIF480- 10B48R2 | 48V/ 10A | 48-55 | 10000 | |||
|
Note: 1. *Use suffix“QQ”for double-faced conformal coating; 2. *Under any conditions, the total power of the product should not exceed the 480W rated power, and the output current cannot exceed the rated output current. |
||||||
| Input Specifications | ||||||
| Item | Operating Conditions | Min. | Typ. | Max. | Unit | |
| Input Voltage Range | AC input | 85 | -- | 264 | VAC | |
| DC input | 120 | -- | 370 | VDC | ||
| Input Voltage Frequency | 47 | -- | 63 | Hz | ||
| Input Current | 1 15VAC | -- | -- | 5 |
A |
|
| 230VAC | -- | -- | 2.5 | |||
| Inrush Current | 1 15VAC | Cold start | -- | -- | 15 | |
| 230VAC | -- | -- | 15 | |||
| Power Factor | 1 15VAC | 0.99 | -- | -- | -- | |
| 230VAC | 0.99 | -- | -- | |||
| Leakage Current | 240VAC | ＜0.8mA | ||||
| Hot Plug | Unavailable | |||||
| Input Undervoltage Protection | Protection start (Input voltage drops from high to low) | -- | 60 | -- | VAC | |
| Protection release (Input voltage rises from low to high) | -- | 75 | -- | |||
| Output Specifications | |||||||
| Item | Operating Conditions | Min. | Typ. | Max. | Unit | ||
| Output Voltage Accuracy | Full load range | -- | ± 1.0 | -- |
% |
||
| Line Regulation | Rated load | -- | ±0.5 | -- | |||
| Load Regulation | 0% - 100% load | -- | ± 1.0 | -- | |||
| Ripple & Noise* |
20MHz bandwidth (peak-to-peak value) |
24V | -- | -- | 50 | V | |
| 48V | -- | -- | 70 | ||||
| Temperature Coefficient | -- | ±0.03 | -- | %/C | |||
| Minimum Load | 0 | -- | -- | % | |||
| Hold-up Time | 16 | 22 | -- | ms | |||
| DC OK Signal | 30VDC/ 1A Max. | ||||||
| Short Circuit Protection | Recovery time 10s after the short circuit disappear. | Hiccup mode, constant current works 1s, turn off 10s, continuous, self-recovery | |||||
| Over-current Protection | 230VAC, rated load | 150% Io (Typ.), the output turned off after working continuously for 1s, self-recovery | |||||
| Over-voltage Protection | 24V | 29-35V (Output voltage hiccup) | |||||
| 48V | 56-60V (Output voltage hiccup) | ||||||
| Over-temperature Protection* | 230VAC, 100% Io | Over-temperature protection start | -- | -- | 90 | C | |
| Over-temperature protection release | 60 | -- | -- | ||||
|
Note: 1. *The“Tip and barrel method”is used for ripple and noise test, output parallel 47uF electrolytic capacitor and 0. 1uF ceramic capacitor, please refer to Enclosed Switching Power Supply Application Notes for specific information; 2. *Over-temperature Protection: Output voltage turn off, self-recovery after the temperature drops. |
|||||||
| Mechanical Specifications | |
| Case Material | Metal (AL1100, SPCC) and Plastic (PC940) |
| Dimensions | 131.50 x 48.00 x 125.00 mm |
| Weight | 980g (Typ.) |
| Cooling Method | Free air convection |
Installation Diagram
Dimensions and Recommended Layout
Our products are sold all over the world, you can rest assured.
